38
Operation
2.
Use [Near] or [Far] button to select an option.
,
Note
•
If you set the AGC to [OFF] on the [EXPOSURE] menu, the [3D-DNR] function is not available.
•
When you use this function, the afterimage may occur.
Color Setting
You can switch the displayed picture to grayscale or color.
4
1.
Select [COLOR] option on the [CAMERA SET] menu.
2.
Use [Near] or [Far] button to change a color effect.
•
ON: To display the picture with color. Select ON and press [Open] or [Close] to display the
submenu. You can adjust the color level using the [Near] or [Far] button.
•
OFF: To display the picture with grayscale