LG L9322 Series Owner's Manual page 50

50 Operation
Home position
The home position is the camera's basic position. The camera returns to this position whenever you
want. Use the following procedure to make the home position.
1. Select [HOME POSITION] option on the [SPECIAL] menu.
2. Use [Near] or [Far] button to set it ON.
3. Press [Open] or [Close] button.
4. Select [SET] option and then press [Open] or [Close] button.
5. Select the home position where you want and then press [Open] or [Close] button.
6. Select [DWELL TIME] option and then select the dwell time.
7. Select [RETURN] option and press [Open] or [Close] button to exit the setting menu.
Go to Home Position
1. Select [HOME POSITION] option on the [SPECIAL] menu.
2. Use [Near] or [Far] button to set it ON.
3. Press [Open] or [Close] button.
4. Select [GO] option and then press [Open] or [Close] button. The camera will move to the home
position.
4
,
Note
• If you do not want to use the home function, set the [HOME POSITION] to [OFF].
• If you set the [HOME POSITION] to [ON], the [AUTO RETURN] option is set to [OFF] automatically
and you can not use it.
Auto Return
This function can be used to specify automatic return to a particular mode if a certain amount of time
elapses without any operation being performed.
1. Select [AUTO RETURN] option on the [SPECIAL] menu.
2. Use [Near] or [Far] button to set it [ON] and then press [Open] or [Close] button.
3. Select [RETURN TIME] option and then select the auto return time.
4. Select [RETURN] option and press [Open] or [Close] button to exit the setting menu