Zone Control; Srs Wow Control - Kenwood DNX8120 Instruction Manual

Audio Control
Zone Control
~
~
• There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer.
- <Audio Setup> (page 64) and <Equalizer Control>
(page 93) are not available
ZoneCOl1\TOj
Touch in the "Audio
Control Menu" screen (page 92).
You can set the front and rear audio source.
o
Display Zone Control
SRS WOW Control
OJ
Displays the current source.
[II
Returns to the "Audio Control Menu" screen.
S
Set the Zone Control
[l]
Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
[I)
Switches the front and rear audio sources.
(This button appears when the Zone
function is On.)
Use "Reverse" to change over the front and
rear audio sources.
[]] Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
You can set up the SRS WOW effect.
o
Display the SRS WOW Control
Touch
ajii>1tI'W I
in the "Audio
Control Menu" screen (page 92).
OJ
Sets a SRS WOw.
You can select any of the following sound
fields.
• "OFF"
• "LOW"
• "MIDDLE"
• "HIGH"
• "USER"
[II
Switches to the Audio SRS Adjust screen.
See <SRS WOW User Setup> (page 95).
[l]
Returns to the "Audio Control Menu" screen.
~
~
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
W
Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
[I]
Returns to the "Audio Control Menu" screen.
94. DNX8120/DDX812/DDX8032BT