Zone Control - Kenwood DDX6036 Instruction Manual

Zone Control

You can set the front and rear audio source.
1 Display the Zone Control screen
> >
Touch [ ] [ ]
2 Set the Zone Control
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
• There are following limitations when zone function is set
to "Dual Zone".
- There is no output from the subwoofer.
- <Equalizer Control> (page 54) and <Speaker Setup>
(page 69) are not available.
[Zone Control]. (page 53)
English 55