Crossover Network Setup - Kenwood DNX8120 Instruction Manual

Setup Menu
Crossover Network Setup
You can set a crossover frequency of speakers.
o
Select the speaker to set the crossover
IT]
Sets the High Pass Filter of the center
speaker.
I1J
Sets the High Pass Filter of the front speaker.
[1] Sets the High Pass Filter of the rear speaker.
@]
Sets the Low Pass Filter of the sub woofer.
[[] Switches to the crossover setup screen.
[]] Returns to the "SETUP Menu" screen.
o
Display the Crossover setup screen
(::"!'
r-x:
-1 '"
~ ~.
o
Set the crossover
II]
Sets the crossover frequency.
When center speaker, front speaker or rear
speaker is selected in step 1:
High Pass Filter adjustment
When Subwoofer is selected in step 1 :
Low Pass Filter adjustment
[]] Sets a crossover slope.
W
Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set
to "Reverse".
[IQ]
Returns to the "Audio SETUP" screen.
Q
~
• When you select a speaker type on the Speaker Set Up
screen, the crossover frequency setup is cleared .
• During crossover setup, the speaker type is set to "User"
68 • DNX8120/DDX812/DDX8032BT
I
on the Speaker Set Up screen.