System Setup - Kenwood DNX8120 Instruction Manual

Setup Menu
System Setup
You can setup the system parameters.
o
Display the SETUP System screen
Touch in the "SETUP
Menu" screen (page 64).
D
Setup each item
IT]
Moves
to the "System SETUP
2"
screen.
[]J
Turns the key touch tone On or Off.
([2]
"On")
W
Allows scrolling of text display on the
Source Control screen.
([2]
"Auto")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
!IJ
Selects a remote control signal.
(12]
"On")
When turned "Off", the remote control ofTV
reception is rejected.
W
Sets a music CD playback.
(12]
"1 ")
''1'': Automatically recognizes and plays
back an Audio file disc, a DVD or a
music CD.
"2": Forcibly plays back a disc as a music
CD. Select "2" if you wish to playa
music CD having a special format or
if you cannot playa disc in the "1"
position.
I]]
Returns to the "SETUP Menu" screen.
~
• You cannot play an Audio fileNCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position .
• Your setup is disabled when the disc is being played.
72 • DNX8120/DDX812/DDX8032BT
IlJ
Returns to the "System SETUP 1" screen.
W
Sets the function of the [NAV] button.
"v.
OFF: Press the [NAV] button for more
than 1 second to turn the display
off.
"R.
CAM": Press the [NAV] button for more
than 1 second to switch to rear
view.
[I]
Sets whether using DSP function or not
when playing DVD-Audio.*l
(12]
"On")
"On": Uses DSP function when playing
DVD-Audio. If the sampling frequency
of the disc is greater than 48 kHz, it is
fixed to 48 kHz.
"Off": DSP fuction is not used in any source.
[!Q]
Returns to the "SETUP Menu" screen.
~
• *1
The setting operation can be made only when in
stanby source (when AV-Out setting of AV Interface
Setup is set to other than DVD), and when in stop mode
of DVD source.