Kenwood DNX5140 - Wide Double-DIN In-Dash Nagivation Instruction Manual
Instruction manual
Hide thumbs
Also See for DNX5140 - Wide Double-DIN In-Dash Nagivation:
- Instruction manual (150 pages) ,
- Service manual (72 pages) ,
- Installation manual (33 pages)
Table of Contents
Advertisement
GPS NAVIGATION SYSTEM
DNX6140/6000EX
DNX5140
MONITOR WITH DVD RECEIVER
DDX514
DDX5034/BT
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX6140/6000EX/5140/ DDX514/5034/5034BT Serial number
US Residence Only
Register your Kenwood product at
www.Kenwoodusa.com
© B64-4254-00/00 (KW/K2W/RW)
Register Online
Advertisement
Table of Contents
Frequently Asked Questions (6)
-
Does the Kenwood DNX5140 support a backup camera?
Yes, the Kenwood DNX5140 supports a backup camera. You can switch to the rear view by pressing and holding the [NAV] button for more than 1 second. In the AV Interface Setup, you can set the unit to automatically switch to the rear view camera display when engaging the shift knob of the car to "Reverse" by setting "R-CAM Interruption" to ON. You can also flip the left and right of the rear view camera video display.
-
How do I connect my phone to the Kenwood DNX5140 via Bluetooth?
To connect your phone via Bluetooth, you first need to register your audio player and cell-phone to the Bluetooth Unit. For DNX5140, an optional Bluetooth unit KCA-BT200 is necessary. Make sure to consult the instruction manual of the Bluetooth Unit for proper registration. Once registered, you can then connect the Bluetooth unit by selecting it from the connect device list and choosing the service to use (Hands Free or Audio).
For more information, see pages 44, 80 and 82 of the manual. -
How do I reset the Kenwood DNX5140 to factory settings?
To reset the unit to factory settings, press the Reset button. Be sure to remove any USB device before pressing the Reset button, as doing so with a USB device installed can damage the data on the device.
For more information, see page 6 of the manual. -
Can I play DVDs or other video formats on the Kenwood DNX5140?
Yes, the Kenwood DNX5140 can play DVDs and other video formats. The unit supports DVD Video, DVD-R DL (Dual layer), DVD+R DL (Double layer), Video CD (VCD), and MPEG1/MPEG2 video files with .mpg or .mpeg extensions. It can also play JPEG picture files.
For more information, see pages 7, 8 and 16 of the manual. -
How do I adjust the sound equalizer settings on the Kenwood DNX5140?
To adjust the sound equalizer settings, navigate to the Audio Control Menu and select Equalizer. From there, you can choose an equalizer curve type such as Natural, Rock, Pops, Easy, Top40, Jazz, or User. You can also adjust items for tone curve setup and set the Q factor for Bass and Middle.
-
What are the common display settings for the Kenwood DNX5140?
You can adjust various display settings for the Kenwood DNX5140. In the Monitor Setup screen, you can adjust the position, picture quality, and screen mode of the monitor. Additionally, within the Screen Control menu, you can adjust the picture quality for different sources, including Brightness Control, Tint Control, Color Control, Contrast Control, and Black Level Adjustment.
Related Manuals for Kenwood DNX5140 - Wide Double-DIN In-Dash Nagivation
Summary of Contents for Kenwood DNX5140 - Wide Double-DIN In-Dash Nagivation
- Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX6140/6000EX/5140/ DDX514/5034/5034BT Serial number...
-
Page 2: Table Of Contents
Contents Basic Operations How to read this manual Before Use Notes Navigation Control iPod Control Using the Navigation System Connecting an iPod Navigatoin Information Interrupt on the Functions When Displaying the Easy Control Screen of Other Sources Panel (DNX6140/DNX6000EX/DNX5140 only) 14 Functions While Displaying the Control Screen Control of Other Sources While Displaying the Navigation Screen... - Page 3 Muting Audio Volume upon Hands Free Unit Control Reception of Phone Call Control Screen Function Muting Audio Volume upon Reception of When Received a Call Phone Call Calling by Entering a Phone Number Quick Dialing Controlling Tone-based Services Calling by Phonebook Character Entry Making a Call Using Outgoing/Incoming Call How to Use the Character Entry Screen...
-
Page 4: How To Read This Manual
How to read this manual This manual uses illustrations to explain its operations. Seek Mode The displays and panels shown in this manual Sets a station selection. are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. - Page 5 English...
-
Page 6: Before Use
• When you purchase optional accessories, check If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they with a cloth moistened with neutral cleaner, then work with your model and in your area. -
Page 7: Notes
Notes Navigation units that can be connected to About HD Radio (KTC-HR300/KTC-HR200) this unit (DDX514/DDX5034/DDX5034BT When you connect an HD Radio, Tuner features of only) the unit are disabled and changed to HD Radio tuner features. • KNA-G510* • KNA-G431* With the HD Radio tuner, you can use the similar •... - Page 8 USB device. An online manual about audio files is put on the • When connecting the USB device, usage of the CA- site, www.kenwood.com/audiofile/. On this online U1EX (option) is recommended. manual, detailed information and notes which are Normal playback is not guaranteed when a cable not written in this manual are provided.
-
Page 9: Region Codes In The World
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. DVD disc marks Operation regulatory marks With this DVD, some functions of this unit such as the Symbol Description play function may be restricted depending on the... -
Page 10: Basic Operations
Basic Operations SI indicator Turns power ON/OFF Switches to the Navigation system Press the button to turn on the power. Press the button to switch the display to the navigation system screen. When the button is pressed and held down for 1 second or more, the power is turned off. - Page 11 Selecting a source Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen 1 Scrolls the source display. 2 Displays the Hands Free screen. (page 48) 3 Press for at least 2 seconds to erase the buttons. Touch the screen to redisplay the buttons.
- Page 12 Basic Operations SI indicator Switches to the Hands Free control Switches to the rear view Press it for more than 1 second to the Hands Press it for more than 1 second to switch to Free control screen. rear view. Press it again for more than 1 second to Press it again for more than 1 second to resume the normal display.
- Page 13 Switching the function screen The function control screen switches in the following order each time you press the button. Navigation screen Picture or Video playback Source Control screen screen [FNC] button [FNC] button [FNC] button Easy Control buttons Easy Control buttons Navigation information appear.
-
Page 14: Navigation Control
Navigation Control Sets and controls the navigation system function. Navigation Information Interrupt on the Using the Navigation System Screen of Other Sources Displays the navigation system screen and makes (DNX6140/DNX6000EX/DNX5140 only) the navigation function available. Interrupts other source screen and displays Displaying the navigation screen information such as guide point. -
Page 15: Control Of Other Sources While Displaying The Navigation Screen
Control of Other Sources While Displaying 8 When touched this area, the source control the Navigation Screen screen appears. Selected source can be controlled while When "TUNER" is selected: displaying navigation screen. Display the easy control buttons 9 Tunes in a station. p Switches the band (to AM or FM 1/2/3). -
Page 16: Watching Dvd/Vcd
Watching DVD/VCD You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, see <Basic Operations> (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch> (page 90). -
Page 17: Functions When Displaying The Easy Control Panel
Functions While Displaying the Control Functions When Displaying the Easy Screen Control Panel Switches to the source control screen to use Displays the basic operation buttons on the various playback functions. screen. While the source is playing, press the [FNC] While the source is playing, press the [FNC] button button... -
Page 18: Dvd Disc Menu
Watching DVD/VCD 9 Stops playing. DVD Disc Menu When pressed twice, the disc is played from Selects an option from the DVD Disc Menu. its beginning when you play it in the next time. Display the Disc Menu Control screen p Selects a chapter, a scene or a track. - Page 19 q Switches the subtitle language. Highlight Control You can select a chapter and title for the DVD (during program playback only) w Switches the voice language. Menu screen. When you touch the screen, you can select the DVD menu. (during program playback only) e Displays the Zoom Control screen.
-
Page 20: Vcd Zoom Control
Watching DVD/VCD VCD Zoom Control Displays an enlarged VCD screen. Display the Zoom Control screen Mode:Full DVD VCD AV–OUT:AV–IN DVD VCD Scene 0 : 0 5 VER2 Z o omC t r l Z o omC t r l Z o om Z o om E x i t E x i t... -
Page 21: Music Disc & Audio File Listening
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file playback. • For the basic method of how to play a music disc/audio file, see <Basic Operations> (page 10). • See <List of playable discs> (page 7) for playable discs. •... - Page 22 Music Disc & Audio File Listening b MUSIC, MOVIE or PICTURE indicator During Audio file playback n Appears when a disc is inserted. m Repeats to play the music or data of the present folder. , Displays images in the folder currently being played one after another.
-
Page 23: Video File/Picture File Watching
Video File/Picture File Watching You can recall various control screens during playback of video file (MPEG 1 and MPEG 2 file) and picture file (JPEG file). 5 JPEG: Picture Control Button Area (page 25) Function During Playback Screen MPEG: Switches to the screen with subtitle Basic functions are available even when the language selection option and voice playback screen is displayed. -
Page 24: Functions When Displaying The Easy Control Panel
Video File/Picture File Watching Functions When Displaying the Easy Functions While Displaying the Control Control Panel Screen Displays the basic operation buttons on the Switches to the source control screen to use screen. various playback functions. While the source is playing, press the [FNC] While the source is playing, press the [FNC] button button... -
Page 25: Picture Control
5 Video/Picture information display g Scrolls the list. h Moves to the top hierarchy level. Selects Folder Name, File Name, Title, Artist j Moves up a hierarchy level. Name, or Album Name. k Displays the currently playing file. When is appeared, the text display is scrolled by pressing it. -
Page 26: Radio Listening
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, see <Basic Operations> (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch> (page 90). -
Page 27: Seek Mode
Seek Mode Sets a station selection. o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. a Switches the list display name to Station The mode is switched in following order each name or Program Service Name. time you touch the button. -
Page 28: Auto Memory
Radio Listening Auto Memory Manual Memory Stores stations with good reception in memory Stores the current receiving station in memory. automatically. Select a station you wish to store in Select a band you wish to store in memory memory Select the Auto Memory mode Store in memory Continue to touch until the memory number Start Auto Memory... -
Page 29: Radio Text
: Press for # seconds. Radio Text Set Station Name You can display the radio text. (Only when Assigns a name to a station. receiving the FM broadcast) Tune in to the station to name Select a station Start Name set Display the radio text Enter the name See <Character Entry>... -
Page 30: Traffic Information
Radio Listening Traffic Information Search for Program Type When a traffic bulletin starts, any source is A program is tuned when you set its program switched to the traffic information and it is type. (Only when receiving the FM broadcast) displayed automatically. -
Page 31: Ipod Control
In this case, "RESUMING" is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • When the iPod is connected to this unit, "KENWOOD" or "✓" is displayed on the iPod to indicate that you cannot operate the iPod. -
Page 32: Functions While Displaying The Control Screen
iPod Control Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. When Video or picture is playing, press the [FNC] button. 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displayed. - Page 33 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by touching the button.
-
Page 34: Usb Device Control
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. • For the connection of a USB device, see <Basic Operations> (page 10). Functions When Displaying the Easy Functions While displaying the Control Control Panel Screen... - Page 35 u Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see <System Setup> (page 64). i Displays the folder list.
-
Page 36: Folder Select
USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. Start Folder Select Select music 1 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 2 Scrolls the list. 3 Moves to the top hierarchy level. -
Page 37: Sirius/Xm Control (North American Sales Area Only)
Sirius/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.) •... -
Page 38: Channel Search
Sirius/XM Control (North American sales area only) Channel Search Channel Memory Specifying the desired category and selecting a Stores the current receiving channel in memory. channel. Select a channel you wish to store in Start Channel Search memory Store in memory Select a category 1 Selects a category. -
Page 39: Direct Channel Search
: Press for # seconds. Direct Channel Search Tuning in by entering the desired channel number. Start Direct Channel Search Enter the channel number 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. Tune in the channel English... -
Page 40: Hd Radio Control
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Functions While Displaying the Control 9 Switches the button display. p Selects the Auto Memory mode. Screen Refer to <Auto Memory> (page 41) Switches to the source control screen to use q Switches the Seek mode. -
Page 41: Seek Mode
Seek Mode Auto Memory Sets a station selection mode. Stores stations with good reception in memory automatically. Select a band you wish to store in memory The mode is switched in following order each time you touch the button. Display Setting "AUTO1"... -
Page 42: Manual Memory
HD Radio Control : Press for # seconds. Manual Memory Receive mode Stores the current receiving station in memory. Sets the radio broadcasts receive mode. Select a station you wish to store in Display the Receive mode screen memory Select the receive mode Store in memory 1 The Receive mode switches in the following Continue to touch until the memory number... - Page 43 English...
-
Page 44: Bluetooth Audio Control
Bluetooth Audio Control You can listen to audio files stored in Bluetooth audio player and cell-phone. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Functions While Displaying the Control Before Use Screen For DNX6140/DNX6000EX/DDX5034BT : Switches to control screen to use various •... -
Page 45: Muting Audio Volume Upon Reception Of Phone Call
Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... -
Page 46: Character Entry
Character Entry When you select the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 Shifts the cursor. 2 Enters characters. 3 Scrolls up or down the character button display. -
Page 47: Screen Control
Screen Control Setting the monitor screen. Screen Control Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. Display Easy Control panel 7 Returns to the previous screen. ⁄ • The Screen Control screen is displayed only when you have applied the parking brake. -
Page 48: Hands Free Unit Control
Hands Free Unit Control Various functions can be used in the Hands Free control mode. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. - Characters in the Phonebook are garbled. Before Use - The phonebook data cannot be downloaded normally •... -
Page 49: When Received A Call
⁄ : Displays short message status. If a cell- phone which supports SMS function • While your car is moving, some functions are disabled for is not connected, this mark does not safety’s sake. The buttons associated with the disabled appear. -
Page 50: Calling By Entering A Phone Number
Hands Free Unit Control Calling by Entering a Phone Number Quick Dialing Makes a call by entering a phone number. You can register up to 6 phone numbers for quick dialing. Display the number input screen ⁄ • Phone numbers must be registered in advance. See <Phone Number Preset>... -
Page 51: Controlling Tone-Based Services
Controlling Tone-based Services Calling by Phonebook Uses tone base service using DTMF (Dual Tone You can call a person using his/her phone Multi Frequency). number that you have registered in the Phonebook. Display the DTMF input screen Display the Phonebook screen Display the Talking screen. - Page 52 Hands Free Unit Control r Calls the selected phone number. Cyrillic alphabet search screen t Creates an SMS for the displayed phone number. See <SMS (Short Message Service)> (page 59). y Scrolls the phone number. u Displays the Phonebook data list. i Returns to the Hands-Free Control screen.
-
Page 53: Making A Call Using Outgoing/Incoming Call Records
⁄ Making a Call Using Outgoing/Incoming Call Records • The Outgoing Calls list screen or Incoming Calls list Calls by selecting a phone number from the screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the outgoing or incoming calls list. -
Page 54: Calling By Voice Recognition
Hands Free Unit Control Calling by Voice Recognition If you hear another Beep sound: Speak the key word within 2 seconds after the Calls by recognizing the registered voice. Beep, or touch the [Phonebook List] button to ⁄ select the phone number. •... -
Page 55: Setting Up The Hands-Free Phone
5 Sets the beep of the incoming SMS. Setting Up the Hands-Free Phone "ON") The Hands-Free system can be set as follows. "ON": Beep is heard. "OFF": Beep is canceled. Display the Hands Free Setup screen 6 Returns to the Hands-Free Control screen. 7 Returns to the "Hands Free Setup 1"... -
Page 56: Voice Registration
Hands Free Unit Control Voice Registration End voice registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. Select the name to register Go through the procedure of <Calling by Phonebook> (page 51). ⁄... -
Page 57: Key Word Voice Registration
Key Word Voice Registration Utter the voice to register (1st try) Registers the voice to select the Phone number category by Voice Recognition. Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See <Control Screen Function> (page 48). -
Page 58: Phone Number Preset
Hands Free Unit Control p Deletes the currently displayed phone Phone Number Preset number. Registers frequently used phone number to q Returns to the previous screen. Hands Free control screen preset button. Search phone number to register with Display the Hands Free Preset List screen each function Display the "Hands Free"... -
Page 59: Sms (Short Message Service)
SMS (Short Message Service) SMS Message screen Uses SMS function. Display the SMS Select screen p Calls the number in the selected message. q Creates a new message for the selected message. w Scrolls the message. e Returns to the previous screen. Select a function Create a message 1 Displays Received Message List. -
Page 60: Setup Menu
Setup Menu You can set up various receiver parameters. Setup Menu Audio Setup Displays the Setup menu to set various functions. You can setup a speaker network, etc. Display the control screen of any source Display the Audio Setup screen Touch in the "Setup Menu"... -
Page 61: Crossover Network Setup
Crossover Network Setup DVD Setup You can set a crossover frequency of speakers. You can set up the DVD play. Select the speaker to set the crossover Display the DVD Setup screen Touch in the "Setup Menu" screen (page 60). Setup each item 1 Sets the High Pass Filter of the front speaker. -
Page 62: Language Setup
Setup Menu Language Setup Selects a language you use for the speech and menus. Select the language item to set See <DVD Setup> (page 61) and select [Menu Language], [Sub Title Language] or [Audio 6 Returns to the "DVD Setup 1" screen. Language]. -
Page 63: Parental Level Setup
Parental Level Setup Select a parental level and complete the setup Sets a parental level. Display the Parental Level code number screen See <DVD Setup> (page 61) and touch [Parental Level]. 6 Selects a parental level. 7 Complete the parental level setup and returns to the "DVD Setup 2"... -
Page 64: System Setup
Setup Menu System Setup You can set up the system parameters. Display the System Setup screen Touch in the "Setup Menu" screen (page 60). 6 Returns to the "System Setup 1" screen. Setup each item 7 Moves to the "System Setup 3" screen. 8 Sets the button illumination color. -
Page 65: Panel Color Coordinate
: Press for # seconds. t Selects a picture display time. ( 4 Adjusts the Blue value. "Long") 5 Returns to the "Panel Color Coordinate" The Display of a JPEG picture is changed. ("Short", "Middle", "Long") screen. Select a Preset number to register Panel Color Coordinate Sets the screen and button illumination color. -
Page 66: Av Interface Setup
"ON": Switches to the rear view camera "RGB") (DDX514/DDX5034/DDX5034BT video display when engaging the only) shift knob of car to "Reverse". "RGB": Allows the Kenwood's Navigation "OFF": Switches to the rear view camera System to connect via the AV INPUT video display when engaging the port. - Page 67 q Returns to the "AV Interface 2" screen. w Selects speakers used for voice guidance of the navigation system. ( "Front LR") "Front L": Uses the front left side speaker for voice guidance. "Front R": Uses the front right side speaker for voice guidance.
-
Page 68: User Interface
Setup Menu 7 Sets an on-screen display of the iPod User Interface Playback screen. ( "Auto") You can set up user interface parameters. "Auto": Information is displayed for 5 seconds when updated. Display the User Interface screen "Manual": Information is displayed when you Touch in the "Setup touch on the screen. -
Page 69: Direct Source Button Setup
Direct Source Button Setup Registers the source displayed in the favorite source screen. Displays the Direct SRC button Setup screen r Returns to the "User Interface 3" screen. t Sets whether to display the name of the , and buttons on the right side of the menu screen. -
Page 70: Entering Background
Setup Menu Entering Background Background Delete Loads a image for background. Deletes the background image. Connect the device which has the image to Delete the image you have loaded load Display the User Interface screen Touch in the "Setup Menu" screen (page 60). Display the Background Memory screen Confirm Select the image to load... -
Page 71: Background Select
Background Select Touch Panel Adjustment Selects a image for background. You can adjust the touch panel operations. Select Background Change screen Display the Touch panel Adjustment screen Touch in the "Setup Menu" screen (page 60). Start Touch panel setup Select a image for background Adjust the Touch panel 1 Returns to the initial background. -
Page 72: Clock Setup
Setup Menu Clock Setup Monitor Setup You can adjust the clock time. You can adjust the position, picture quality and the screen mode of the monitor. Display the Clock Setup screen Displaying the Monitor SETUP screen Touch in the "Setup Menu"... - Page 73 8 Selects a screen mode of the DVD playback Full picture mode ("Full") screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. Zoom picture mode ("Zoom") You can select any of the following screen mode.
-
Page 74: Security Code Setup
Setup Menu Security Code Setup Register your security code You can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Reenter the security code Note the Security Code can be set as the 4 digit number Reenter the same security code as that you... -
Page 75: Deactivating Security Code
If you have pressed the Reset button or if Deactivating Security Code you have disconnected the Receiver from To deactivate the Security Code function. battery... Display Security Code Setup screen Enter the correct security code Touch in the "Setup Menu" screen (page 60). Start to cancel a registration of the Security Code You must enter the same security code as that... -
Page 76: Ipod Setup
Setup Menu iPod Setup Sirius Setup Performs setup when using iPod. You can set up the Parental lock for Sirius. Display the iPod Setup screen Display the Sirius Setup screen Touch in the "Setup Touch in the "Setup Menu" screen (page 60). Menu"... -
Page 77: Sirius Parental Code Setup
Sirius Parental Code Setup Confirm the code number Sets a Sirius Parental code. Enter the same code number as you input in step 3. Display the Parental Code screen Sirius Parental code is now set, and the display ⁄ returns to SIRIUS Setup screen. •... -
Page 78: Sirius Parental Lock Setup
Setup Menu Sirius Parental Lock Setup Sirius Parental Lock Channel Select Sets a Sirius Parental Lock function on or off. Selects the channel to enable Sirius Parental lock function. Display the Parental Code screen Display the Parental Code screen ⁄ •... -
Page 79: Bluetooth Setup
Bluetooth Setup Set the parental lock for each channel Registers and selects Bluetooth unit. Display the Bluetooth Setup screen Touch in the "Setup Menu" screen (page 60). Setup each item 5 Lists the channel. The channel name scrolls by pressing 6 Scrolls the channel list. -
Page 80: Registering Bluetooth Unit
Setup Menu Registering Bluetooth Unit Enter PIN code Registers the Bluetooth unit to be connected. Enter the PIN code specified for the Bluetooth unit to register. Display the Connect Device List screen w Enters a code number. e Cancels registration of PIN code. Search for a Bluetooth unit r Enters PIN code. -
Page 81: Registering Bluetooth Unit Pin Code
Registering Bluetooth Unit PIN Code Registering Special Bluetooth Unit Sets the PIN code of this unit (DNX6140/ Registers Special Bluetooth unit that results in DNX6000EX/DDX5034BT only) or KCA-BT200 to error by normal operation by selecting from enter when registering (pairing) from the cell- model name. -
Page 82: Bluetooth Unit Connection
Setup Menu Bluetooth Unit Connection Deleting Bluetooth Unit Selects the Bluetooth unit to connect. Deletes the registered Bluetooth unit. Display the Connect Device List screen Display the Connect Device List screen Select a registered Bluetooth unit Select a Bluetooth unit to delete 1 Displays the registered Bluetooth unit. -
Page 83: Software Information
Software Information Checks the software version of this unit. Display the Software Information screen Touch in the "Setup Menu" screen (page 60). 1 Displays the software keycode. 2 Displays the software version. 3 Displays the Bluetooth firmware version. 4 Uses for Bluetooth firmware update. (DNX6140/DNX6000EX/DDX5034BT only) English... -
Page 84: Setup Memory
Setup Menu Setup Memory Memorize or recall the settings Audio Set Up and AV Interface settings can be When memorizing the Audio Setup and AV memorized. The memorized settings can be Interface settings: recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. - Page 85 English...
-
Page 86: Audio Control
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound You can adjust the front/rear and right/left audio effect function of this unit. balance. Display the control screen of any source Display Audio Control screen Touch in the "Audio Control Menu"... -
Page 87: Equalizer Control
9 Adjusts the volume of the present source Equalizer Control based on the difference level of original You can set up the equalizer. volume. ⁄ Display Equalizer Control • If you have increased the volume first, then reduced the Touch in the "Audio volume using the "Vol. -
Page 88: Tone Setup
Audio Control Tone Setup Zone Control You can set a Tone curve. You can set the front and rear audio source. Display the Tone screen Display Zone Control Touch in the "Audio Control Menu" screen (page 86). See <Equalizer Control> (page 87). Set the Tone 1 Displays the current source. - Page 89 set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See <AV Interface Setup> (page 66). English...
-
Page 90: Remote Controller
Remote Controller For DDX5034/DDX5034BT : This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. For DNX6140/DNX6000EX/DNX5140/DDX514 : Optional Remote Controller KNA-RCDV330 is designed for controlling this unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. -
Page 91: Common Operations (Aud Mode)
Common operations (AUD mode) Cursor key Moves the cursor when displaying menu. Source switching Switches to the source to be played. AUD• DVD• ENTER T V• DISP V.SEL − OPEN MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM ENTER... -
Page 92: Dvd/Vcd/Cd/Audio Files (Dvd Mode)
Remote Controller DVD/VCD/CD/Audio files (DVD mode) Track number Folder search Play time Selects the folder to be played. Cancel − Audio files OPEN Folder number 2 ZONE File number Cancel Track search and file search Selects the track or file to be played. VCD 1.X, VCD 2.X (PBC OFF) Track number −... -
Page 93: Radio (Aud Mode)
Radio (AUD mode) DVD Menu Displays the DVD menu. Band switching Turns the playback control on or off while playing Switches to bands received by the unit. VCD. DISP V.SEL − OPEN MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE... -
Page 94: Dvd Language Codes
DVD Language Codes Code Language Code Language Code Language Afar Icelandic Singhalese Abkhazian Italian Slovak Afrikaans Japanese Slovenian Amharic Javanese Samoan Arabic Georgian Shona Assamese Kazakh Somali Aymara Greenlandic Albanian Azerbaijani Cambodian Serbian Bashkir Kannada Siswati Byelorussian Korean Sesotho Bulgarian Kashmiri Sundanese Bihari... - Page 95 English...
-
Page 96: Help? Troubleshooting
Help? Troubleshooting Some functions of this unit may be disabled by What might seem to be a malfunction in your unit some settings made on this unit. may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. - Page 97 English...
-
Page 98: Help? Error
Remove the USB device. ➡ Eject the disc and try inserting it again. Contact Authorization Error: the Kenwood dealer if this indicator continues Connection to the iPod has failed. blinking or the disc cannot be ejected. ➡ Remove the iPod and then reconnect it. - Page 99 Check Sirius: CH UNAUTHORIZED: The unit cannot recognize the connected Sirius Tuner The selected channel is not subscribed. Box. OFF AIR: ➡ Check the connection of the Sirius Tuner Box. The broadcast of the selected channel has finished. Antenna Error: Something is wrong with the anntena.
-
Page 100: Specifications
Specifications Monitor section USB interface section Picture Size USB Standard : 6.1 inches (diagonal) wide : USB 1.1/ 2.0 (High Speed) File System : 136.1 mm (W) x 72.0 mm (H) Display System : FAT 16/ 32 Maximum Power Supply Current : Transparent TN LCD panel Drive System : 500 mA... - Page 101 Video Output Level (RCA jacks) Navigation section : 1 Vp-p/ 75 Ω (DNX6140/DNX6000EX/DNX5140 only) Audio Output Level (RCA jacks) Receiver : 1.2 V/ 10 kΩ : High-sensitivity GPS receiver Analog RGB input Reception Frequency (DDX514/DDX5034/DDX5034BT only) : 1575.42 MHz (C/A code) : 0.7 Vp-p/ 75 Ω...
- Page 102 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. The "AAC" logo is a trademark of Dolby Laboratories.
- Page 103 Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.
Need help?
Do you have a question about the DNX5140 - Wide Double-DIN In-Dash Nagivation and is the answer not in the manual?
Questions and answers
Cómo se conecta el bluctu del esterio