Speaker Set Up - Kenwood DNX8120 Instruction Manual

Gps navigation system, monitor with dvd receiver
Hide thumbs Also See for DNX8120:
Table of Contents

Advertisement

When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
[[J
Selects a speaker to be set.
(see <Speaker Set Up>, page 65)
III
Sets the use or no use of tweeter.
(see <Speaker Set Up>, page 65)
[I]
Selects a speaker type.
(see <Speaker Set Up>, page 65)
[]] Displays the Speaker Crossover Setup
screen.
(See <Crossover Network Setup>, page 68)
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
[Q]
Displays the Channel Level Setup screen.
[IQJ
Displays the Car Type Set Up screen.
[II]
Returns to the "SETUP Menu" screen.
G1I
Selects a speaker to be set.
(see <Channel Level>, page 66)
Q]
Sets the speaker volume.
(see <Channel Level>, page 66)
[HJ
Starts or stops test signal tone output for
setup check.
[J]
Displays the Speaker Set Up screen.
[j]]
Returns to the "SETUP Menu" screen.
Speaker Set Up
You can select a speaker type and its size to get
the best sound effects.
D
Select a speaker you wish to adjust
OJ
Center speaker
I1J
Front speaker
Q]
Rear speaker
I1J
Subwoofer
[[J
Tweeter setup
You can set the tweeter when you are
selecting front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "Use". In
the "Use" position, the Equalizer is adjusted
to its best position.
D
Select a speaker type
You can select any of the following speaker types.
Center speaker:
NONE, 2 3/4x1 9/16 inch, 2 inch, 4 inch, 5 inch,
6 1/2 inch over
Front speakers:
OEM,4 inch, 5 inch, 61/2 inch, 6 3/4 inch, 7 inch,
4x6,Sx7,6x8,6x9,7xlO
Rear speakers:
NONE, OEM, 4inch, Sinch, 6 1/2inch, 6 3/4inch,
7inch,4x6,5x7,6x8,6x9,7x10
Nextpage~
English.
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ddx8032btDdx812

Table of Contents