Table of Contents
Advertisement
Zone Control
You can set the front and rear audio source.
Displaying the Zone Control screen
Zone Control
Zone Control screen
MENU
4
1
6
2
TV
3
7
Front
1
8
Area
Reverse
84
|
English
5
Zone
Rear Vol. 15
6
Dual Zone
5
DVD
7
Rear
Zone Control
Zone Control
Zone Control
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (page 47)
4 Calls the Sound Effects Menu.
5 Turns the Zone Function (that sets different source
1
sounds for front and rear speakers) On or Off.
When turned On,
are shown.
6 Adjusts the volume of the rear channel.
(This button appears when the Zone function is
On.)
7 Sets the front and rear audio source separately.
1
(This button appears when the Zone function is
On.)
• When the rear speaker sound is switched, the audio source
that is output at the AV OUTPUT terminal is also switched to
the same source.
However, if you have set the "Area" to "Reverse", the audio
source that is output at the AV OUTPUT terminal is switched
depending on the front sound source.
8 Switches the front and rear audio sources.
(This button appears when the Zone function is
On.)
Use "Reverse" to change over the front and rear
audio sources.
• There are following limitations when zone function is set to
"
"
On
.
- There is no output from the subwoofer or center.
- <Audio Setup> (page 48), <Equalizer> (page 76), <Surround
Control> (page78), <SRS WOW> (page 80) <Position>
(page82) are not available.
Sound Effects Menu
and
and Rear volume
Front
Rear
Advertisement
Table of Contents
