Bridge/Router Application; Figure 1-7. Simple Bridge Application On A T1 Or Ft1 Circuit - ADTRAN TSU LT User Manual

TSU LT User Manual Chapter 1. Introduction

Bridge/Router Application

A bridge or router can be interfaced to the network by using the V.35/V.11 DTE interface. The bandwidth
used is programmable at Nx56 or Nx64 data rates for T1 or FT1 service. The bandwidth can be selected as
contiguous or alternate. Figure 1-7 shows a simple bridge application.

Figure 1-7. Simple Bridge Application on a T1 or FT1 Circuit

61202060L4-1 © 2002 ADTRAN, Inc. 29