Utility Menu
Chapter 6
UTIL
The
menu is used to view and to set system parameters. See Figure 6-1. This includes setting the
U
TILITY
time and date and resetting all parameters to factory values or to re-initialize the unit. This menu is also
used to view the unit's software revision and the unit ID setting
UTIL
Time/Date
is used to view or to edit the current time and date. The time and date are maintained during
T
/D
IME
ATE
power off conditions (see Figure 6-2). Table 6-1 on page 52 lists steps for editing the time and date.
61202060L4-1
1) TIME/DATE
2) SOFTWARE REV
3) REINIT UNIT
4) ADDRESS
5) SET PASSCODE
6) FACT RESTORE
Figure 6-1. Utility Menu
Figure 6-2. Time/Date Screen
© 2002 ADTRAN, Inc.
TIME: HH:MM:SS
DATE: MM/DD/YY
Displays current
software revision
(Returns all configurations to factory settings)
51