Nx56K/64K Dte (V.35); Table C-4. V.35 Pin Assignment - ADTRAN TSU LT User Manual

Appendix C. Pinouts

Nx56K/64K DTE (V.35)

On the rear panel of P/N 1202060L2, the TSU LT has a V.35 interface for connecting DTE equipment. The
pinout for this connector is shown in Table C-4.
Connector Type
Product Number
Pin CCITT
A 101
B 102
C 105
D 106
E 107
F 109
H —
J —
L —
N —
R 104
T 104
V 115
X 115
P 103
S 103
Y 114
AA 114
U 113
W 113
NN&K —
68
V.35
AMP# 92-4883-3-1

Table C-4. V.35 Pin Assignment

Description
Protective ground (PG)
Signal ground (SG)
Request to send (RTS) from DTE
Clear to send (CTS) to DTE
Data set ready (DSR) to DTE
Received line signal detector (DCD) to DTE
Data terminal ready (DTR) from DTE
Ring indicator (RI)
Local loopback (LL)
Remote loopback (RL)
Received data (RD-A) to DTE
Received data (RD-B) to DTE
RX clock (RC-A) to DTE
RX clock (RC-B) to DTE
Transmitted data (TD-A) from DTE
Transmitted data (TD-B) from DTE
TX clock (TC-A)
TX clock (TC-B)
External TX clock (ETC-A) from DTE
External TX clock (ETC-B) from DTE
Test mode (TM) to DTE
© 2002 ADTRAN, Inc.
TSU LT User Manual
61202060L4-1