Umbrella Assembly - Treasure Garden AKZ Cantilever Assembly And Operation Manual

S T E P 2 Umbrella Assembly
NOTE: Two-persons recommended for team lift and the rest of the assembly.
Remove rotating hub from the main frame by removing the (2) main frame bolts (Fig. 10),
set aside bolts for later use. Now, place rotating hub into mounting plate (Fig. 11) and tighten
with supplied (5) washers & (5) hub bolts (Fig. 12). Assemble main frame onto hub and
lower carefully (Fig. 13). Insert the two bolts on bottom portion of main frame and tighten
using large hexagon wrench provided (Fig. 13). DO NOT OVER-TIGHTEN. Locate the
crank lift handle and install onto the mid-area of the main frame. Use the small hexagon
wrench provided to lock in the small screw (Fig. 14).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA.
Large
Hexagon
Wrench
(Fig. 10)
(Fig. 11)
(Fig. 12)
Large
Hexagon
Wrench
(Fig. 13)
(Fig. 14)
4