Akz/Akzsq Part List; Required For Assembly - Treasure Garden AKZ Cantilever Assembly And Operation Manual

AKZ/AKZSQ PART LIST

Part
1
2
3
4
5
6
7
8
9
10
11
12
13

REQUIRED FOR ASSEMBLY:

• 200 lbs. playground sand (not included).
NOTE: Do not put or allow sand into the center of the base shell.
IMPORTANT: Prior to assembly it is important to decide on the location of the AKZ umbrella.
The umbrella measures approximately 10 ft. in height and 13 ft. in width.
• Allow ample height to avoid damage to your umbrella during assembly and usage.
• Choose a location that is level and sturdy.
• Avoid any sloping or soft ground cover.
• Consider a location that will maximize the umbrella's rotating swivel function. Placing
the AKZ between two entertaining areas is ideal.
NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard any
packaging or box until assembly is complete.
Description
Base Shell
Base Lid
Steel Wrench
Inverted Base Stem
Mounting Plate
Playground Sand (not included)
Large Hexagon Wrench
AKZ Main Frame
Crank Lift Handle
Small Hexagon Wrench
Hub Bolts
Plate Bolts
Washers
Qty.
1
1
1
1
1
200 lbs.
1
1
1
1
5
4
5
2