Mix; Skin; Soundcard - MIXVIBES VFX CONTROL User Manual

8 Preferences

8.2 Mix

BPM/GAIN TOOLS
To improve the BPM detection, refine the BPM range : define the range of tempo MIXVIBES VFX can analyze. Note: A
smaller range will ensure a faster and more accurate analysis of your MediaBase. Each style has its own classic BPM range.
You can find more information about this topic on the Internet.
Display vinyl pitch: displays your turntable's pitch analyzed by MIXVIBES VFX.
Calculate BPM on load : activates/deactivates the BPM calculation upon media load depending on the resources of your
computer.
Auto Gain adjustment : the gain values of media with a different volume level will be matched. This will avoid saturation.
CUE / AUTOSTART
Audio Auto Cue : activates/deactivates the audio Auto Cue.
Search time range : sets the time interval from the beginning of the track in which MIXVIBES VFX will set a Cue point.
Sound detection level : sets the minimum sound level (dB) for the Cue point. Note: MIXVIBES VFX will set the cue at the
first point within the time interval that reaches the sound detection value.
TIMING
Fade : defines the time (in seconds) of your Auto mix transitions (playlist).
End of media alarm : defines the maximum time (in seconds) until the end of the track before the alert starts. Note: In the
example below, MIXVIBES VFX will start the alarm 10 seconds before the end of the track.

8.3 Skin

This option will allow you to select the default skin for VFX. Under each skin preview, you'll find a short layout description of
your skin (screen resolution, simple/complete).
Comments will help you select the skin:
C
1280 or 1440 pixels screen resolution. The VFX 1280 skin is optimized for monitors wider than 1280 pixels. The VFX
M
1440 skin is optimized for monitors wider than 1440 pixels.
Y
VFX or VFX+mixer skin. The VFX+mixer skin is designed for a perfect use with VFX CONTROL controller. To show
CM
more controls, click on the Control button of the integrated mixer. VFX skin was designed to display all functions within
MY
MIXVIBES VFX. To show 4 players, go to the menu [Options > Number of players].
CY
CMY

8.4 Soundcard

K
This menu lets you define which audio hardware you will use, the number of devices, and the latency time.
You can enable/disable the auto-configuration (to validate a change, you must restart MIXVIBES).Auto-configuration
allows MIXVIBES to:
mix_options.pdf 20/10/2010 17:25:46
C
M
Mix
Y
CM
MY
CY
CMY
K
39 /
50
vibe-watermark-bright.pdf