First Mix With Cross Dj And U-Mix Control Pro My - MIXVIBES U-Mix Control Pro User Manual

8 First Mix with CROSS DJ and U-MIX CONTROL PRO
1 Load a track into the player A and the waveform will appear.
2 Start playback of the audio in the player.
3 You should now hear the music in your speakers: You can start mixing.
4 While the track on deck A is playing for the audience, press the Cue/Monitor button on deck B so that you
can pre-listen the track you will be preparing on deck B on your headphones while the audience continues
to listen to the track being played on deck A over the speakers.
5 The two audio tracks are most likely not at the same tempo. You need to match the tempo of both tracks,
and synchronize one player with the other by:
adjusting the pitch (via the pitch fader and the pitchbend buttons or the jogwheel platter of the
U-MIX CONTROL PRO). Use the Beat Matcher in the Head-Up Display as visual indicator.
using the Sync buttons to automatically perform those two tasks. Pressing the Sync button will
adjust the playback position to match the downbeat of the other player and match the tempo of
the other player.
6 Adjust the level using the Gain knob, which allows you to set the overall level to match that of the track
playing on the other deck.
7 To go from one track to another, move the crossfader from left to right, or use the channels faders on the
integrated mixer of the U-MIX CONTROL PRO.
8 You can also change the channel equalization of the mixer to make the transition more smoothly between
the two tracks.
C
9 You can also use the effects and loops to highlight different parts of an audio track.
M
J
CM
MJ
CJ
CMJ
N
sync_and_HUD_dj.pdf sync_and_HUD_dj.pdf
Beat Matcher
C
M
Y
CM
MY
CY
CMY
K
25 /
30
01/07/2009 01/07/2009 16:31:13 16:31:13
vibe-watermark-bright.pdf