Midi - MIXVIBES VFX CONTROL User Manual

8 Preferences
presets, recommended for an easy use of MIXVIBES VFX. If you don't feel comfortable with these presets, you can make your
own.
CAUTION: by editing a preset, you may not be able to get back to the original preset. If you want to make your own preset, we
recommend you to first create a New keyboard file before mapping your keyboard.
KEYBOARD LEARNING
This MIXVIBES VFX feature allows you to map your keyboard in a just a few seconds by placing your mouse over a player
button and pressing the desired keyboard key.
First, create a new Keyboard file by pressing New in the keyboard options menu, name it, press 'return' to apply and then OK
to leave the options menu. In the options menu, activate the learning button as shown bellow.
In order to map a key, follow these steps:
1 Pass your mouse over a button of your MIXVIBES VFX player: the button is highlighted.
2 Press the desired keyboard key for the chosen action (e.g. CUE).
3 Your key is now mapped. In order to map further buttons, move your mouse to the next button and press the next
desired keyboard key.
4 Once you're finished, deactivate the learning button from the options menu. Check out in the keyboard options > Edit,
that all your changes have been taken into account.
CAUTION: All buttons of the player, like sliders, cannot be mapped thanks to keyboard learning. You may still drive them with
your mouse or choose a keyboard preset file and edit a few keys using keyboard learning while keeping faders and sliders
working or edit the keyboard file manually.

8.10 MIDI

MIXVIBES VFX can be controlled by a MIDI controller (we recommend the VFX CONTROL; MIXVIBES does not ensure 100%
compability with non-listed 3rd party controllers).
1 Select your MIDI input device from the pull down menu.
2 Select your MIDI device mapping by clicking on it.
3 Validate by clicking on OK.
C
M
MIDI LEARNING
Y
This MIXVIBES VFX feature allows you to map your midi controller in a just a few seconds by placing your mouse over a player
CM
button and pressing the wished key of your midi controller.
First, create a new MIDI file by pressing New in the MIDI option menu, name it, press 'return' to apply and then OK to leave MY
the options menu. In the options menu, activate the learning button as shown below.
CY
In order to map a key, follow these steps:
CMY
1 Move your mouse over a button of your MIXVIBES VFX player: the button is highlighted.
K
2 Press the desired controller key for the chosen action (e.g. CUE).
keyboard_options.pdf 20/10/2010 17:28:26
C
M
Keyboard
Y
CM
MY
CY
CMY
K
42 /
50
vibe-watermark-bright.pdf