Table of Contents
Advertisement
6 Software user interface
6.5.2 External mixer setup / External mixer and external audio interface setup
With two stereo outputs, this rack controls the output volume of players A and B.
mix1.pdf 09/11/2010 15:09:01
1
Player A output: the main volume rack is a tool used to master your player A audio signal. To avoid saturation,
check the audio signal view. If the signal is saturated you must change your settings in the Master volume section or
Equalizer/mixer section.
2
Player B output: the main volume rack is a tool used to master your player B audio signal. To avoid saturation,
check the audio signal view. If the signal is saturated you must change your settings in the Master volume section or
Equalizer/mixer section.
3
Recording: records your mix in WAV format. Click the button in the volume rack of your choice and designate the
name and directory for the recording. The recording is active at once! Click again to stop the recording. Keep an eye on
the Record output vu-meter to make sure the recording does not saturate!
6.6 The Mix rack
This tool enables you to control visually that the media files are in sync. Indeed the peaks represent a sound increase and
usually correspond to the beat of a track. When two media files are in sync, the peaks are simultaneous. The player B peaks
are displayed in the lower part, while the player A beats are displayed above.
2
1
Zoom : zooms in and out.
2
Beat : displays the beats. When two media files are in sync, their beats and peak are running simultaneously.
3
Bar : displays the bars.
4
Sync : chooses between three different synchronization modes:
Tempo : automatic synchronization based on the music's energy.
Beat : beats synchronization.
Bar : bars synchronization.
6.7 The Video Mixer rack
1
Main video output view: displays the main monitor output window. You can launch it by double-clicking this display.
If one monitor is used, a pop-up window asks for confirmation. If two monitors are used, the video window is placed on
the second one. To switch from full screen to window display, you need to double-click again on the mixer view. If you
use the VFX+mixer skin, this rack does not display the main monitor output window.
2
Image parameters: sets image contrast, brightness and saturation of your images.
Mix
video.pdf 09/11/2010 15:10:38
C
M
1
Y
CM
MY
Video Mixer
CY
CMY
K
29 /
50
3
vibe-watermark-bright.pdf
2
1
4
Advertisement
Table of Contents
Need help?
Do you have a question about the VFX CONTROL and is the answer not in the manual?
Questions and answers