Choosing The Skin; Configuring The Audio - MIXVIBES VFX CONTROL User Manual

4 Getting started
4.4.2 Manual configuration
The manual configuration allows you to choose the skin and configure the audio preferences quickly.

4.5 Choosing the skin

1 Open [Options/Preferences/Skin].
2 Select a skin. Comments will help you select the skin:
1280 or 1440 pixels screen resolution. The VFX 1280 skin is optimized for monitors wider than 1280 pixels. The
VFX 1440 skin is optimized for monitors wider than 1440 pixels.
VFX or VFX+mixer skin. The VFX+mixer skin is designed for a perfect use with VFX CONTROL controller. To
show more controls, click on the Control button of the integrated mixer. VFX skin was designed to display all
functions within MIXVIBES VFX. To show 4 players, go to the menu [Options > Number of players].
4.6 Configuring the audio
To change the audio settings, you must uncheck the 'Enable the auto-configuration' box.
4.6.1 Stand alone setup
Standalone mode is the default audio configuration when using your VFX CONTROL controller in auto-configuration. All the
following should already be set up.
1 Check that all player outputs are set to 1.
2 Open [Options/Preferences/Soundcard].
3 Choose the ASIO mode.
4 Select Mixvibes ASIO VFX Control as your output device.
5 Select '2' as the number of outputs.
6 Click on the 'Setup' button to select the audio outputs (click 'Control options' to open the soundcard driver control
panel if necessary).
7 Choose 'VFX CONTROL 1' and 'VFX CONTROL 2' on the first line for stereo out 1 (this output is your system's
MASTER out) and choose 'VFX CONTROL 5' and 'VFX CONTROL 6' on the second line for stereo out 2 then
click on the monitor button to set this output as your system's MONITORING out.
8 Click OK twice.
9 Press the CUE button on your VFX CONTROL to pre-listen a media in the player of your choice.
C
audio_1.pdf 09/02/2010 14:20:41
M
Y
CM
MY
CY
CMY
Stand alone setup
K
11 /
50
vibe-watermark-bright.pdf