Eq/Gain Cm; Video - MIXVIBES VFX CONTROL User Manual

8 Preferences
automatically configure MIXVIBES audio interfaces outputs.
enable MIXVIBES MIDI controllers.
choose the best skin according to your resolution and your MIDI setup.
If you use MIXVIBES VFX CONTROL in stand alone setup, it is advisable to choose the auto-configuration.
Depending on your hardware, a latency time that is set too low can affect media playback. If you experience sound cuts,
progressively increase latency until the problem is solved. If you feel an important delay between your actions within MIXVIBES
VFX and their effect on the sound, reduce it.
In ASIO mode, press the Setup button to select audio outputs. Press the control panel button to access to the soundcard
driver's control panel.
You can also set up the monitoring: this is useful if you do not use an external mixer. In the example below, the soundcard
audio output 1/2 connects to your sound system's MASTER input and output 5/6 is used to connect your headphones. You only
have to set up your players on output 1 and click on the monitoring button to monitor a media in the appropriate player.
8.5 EQ/Gain
The equalization option sets the sound quality with more accuracy. Be careful, depending on your media set you may need to
set up the gain amount to 20 dB (indeed video files can have a lower gain than audio files).

8.6 Video

C
SCREEN CONFIGURATION
M
Video resolution: configures the video quality (output resolution).
Y
Display properties: opens the display settings window.
CM
media_ratio2.pdf 06/11/2009 15:57:45
VIDEO CONFIGURATION
MY
Cache size for each loaded video: modifies the cache size for each loaded video. You should keep the value 100MB.
CY
Media Ratio: images below show the three media ratio types.
CMY
K
audio_1.pdf 09/02/2010 14:20:41
media_ratio3.pdf 06/11/2009 15:58:18
Media Ratio: Preserve / Crop to fill / Stretch
Soundcard
C
M
Y
CM
media_ratio1.pdf 06/11/2009 15:57:08
MY
CY
CMY
K
40 /
50
vibe-watermark-bright.pdf