Ringer Controls - Avaya 9504 User Manual

17.6 Ringer Controls

This section covers controls for adjusting the ringing used by your phone.
Switch the Ringer On/Off
·
Flash the message lamp for calls (Visual Alerting)
·
Coverage Ring
· 98
Ring Sound
·
99
Ring Volume
· 100
Internal Auto Answer
·
· Audible Alerting
Calls are presented with a number of different ring patterns.
· Internal Calls: Repeated single ring.
· External Calls: Repeated double ring.
· Ringback/Return Calls: Repeated single-ring followed by two short rings.
This type of ring is used for calls that are returning to your phone. For example, a call that you put on hold and
which is returning due to being left on hold too long.
· Coverage Ring: Variable
You can also adjust the ringing used for call coverage and bridged appearance buttons. See
options are normal ringing, an abbreviated ring (a non-repeated single ring) or no ring.
· Attention Ring: Variable
The system administrator can adjust the ring used for new calls when you are already talking to a caller. The
options are an abbreviated ring (a non-repeated single ring) or no ring.
· For calls alerting on a call coverage or bridged appearance button when you are already on a call, the shorter
of the coverage ring or attention ring settings is used.
The system administrator can also adjust the when ringing is used for each specific appearance button. The ringing can be
immediate, delayed for a set time or off.
9500 Series Phone User Guide
IP Office
98
100
98
Phone Settings: Auto Lock
Coverage Ring . The
98
Page 97
Issue 04a (03 October 2011)