Table of Contents
Advertisement
PACKAGING
Your first impression is important to us!
The packaging of your new stove provides excellent
protection against damage. However damage to the stove
and accessories may still occur during transport.
Therefore please check your stove on receipt for
damage and completeness! Report any deficiencies to
your dealer immediately! Pay particular attention
during unpacking that the stone and ceramic panels
remain intact. Scratches to the material can easily
occur. Natural stone and ceramic panels are excluded
from the warranty.
The packaging of your new stove is environmentally
neutral to a great extent.
The wood used in the packaging has not been surface
treated and may therefore be burnt in your stove. The
cardboard and film (PE) can be disposed of via the
municipal waste collection for recycling.
TECHNICAL DATA
As a stove of type 1, connection to a chimney already used
by other stoves for solid or liquid fuels is possible as long
as the chimney dimensions do not contradict this
according to DIN 4705 (Part 3).
TECHNICAL DATA
Dimensions (mm) and weights (kg)
Height
Width
Depth of the corpus
Weight with steel casing
Flue pipe outlet diameter
Raed heating capacity as per EN13240
Lowest thermal output
Room heating capacity dependent on the
house insulation
Fuel flow rate
Efficiency
CO2 content
CO emissions related to 13% O
dust emissions
Exhaust values for multiple use of the chimney
according to DIN 4705 or to dimension the chimney
according to DIN 4705.
Exhaust mass flow
Exhaust temperature
Minimum feed pressure at rated useful heat
The owner of small firing systems or the person
authorised for the small firing system is to keep the
technical documentation and is to submit it to the
authorities or the chimney sweep on request.
1000
440
440
158
130
4 kW
2 kW
50-110 m3
1,2 kg/h
80,9 %
8,9 %
1095
mg/Nm3
18 mg/Nm3
- 7 -
5,3 g/s
213,8 ° C
12 Pa
Advertisement
Table of Contents
