Teeter Hang Ups ComforTrak Series Assembly Instructions Manual page 6

Head Pillow
1
2 Bed Frame Extension
3 ComforTrak™ Table Bed
3-Hole Roller Hinges
4
5 Handles
Height-Selector Locking Pin
6
7 Spreader Arms
What Model Do You Own?
Important: Please locate the model of your
Teeter inversion table before assembly.
The model can be found on A) the exterior of the box,
or B) the serial label located on the back of the table bed.
My Serial Number:
__________________
Don't forget to register your
warranty
BEFORE BEGINNING
Before reading further, study the drawing below to familiarize yourself with
the important components of your new Teeter Hang Ups
8 Angle Tether
9 Crossbar
10 A-Frame
11 Main Shaft
12
Ankle Lock System
13 Ankle Comfort Dial™
14 Stability Feet
® inversion table.
4
6
8
9
10
11
12
13
14
1
2
3
5
7
*Inversion Table images may
vary slightly from your model.
The EP-560 is shown here.