Teeter Hang Ups ComforTrak Series Assembly Instructions Manual page 20

FIGURE 24
FIGURE 25
Step 9
Attach the Head Pillow (EP-1105)
• Attach the Head Pillow by securing the Velcro Straps through the holes in the Table Bed
(Figure 24). The position of the pillow can be adjusted depending on the user.
Attach the Owner's Maunal
The Owner's Manual contains important information on how to use your Teeter Hang Ups, including how
to personalize the user settings, properly secure and release the Ankle Lock System, and test and adjust
the rotation control.
• If not already attached, thread the provided metal chain, provided, through the pre-punched
hole in the upper corner of the Owner's Manual.
• Secure the chain to the A-Frame through the designated hole in the HInge Plate (Figure 25).
Allow the Owner's Manual to hang freely on the outside of the A-Frame Spread Arms so it
doesn't interfere with the rotation of the Table Bed.
IMPORTANT: Do not remove the Owner's Manual. It should remain permanently attached
to the A-Frame of your inversion table to serve as a reference for proper adjustment and
use of the equipment.
Before Use
• Test the Inversion Table by hand for smooth and steady rotation (Figure 25) and that all
fasteners are secure.
• Please complete the warranty registration online
Read the Owner's Manual thoroughly before using your Teeter Hang Ups
Inversion Table. Improper settings could result in serious injury or death!
! WARNING