FLIR DNV14UX2 Instruction Manual page 19

6a
Thumb Screw
6b
6c
microSD card
6a. Adjust camera viewing angle and secure into
place by tightening thumb screw using a flat head
screwdriver.
Avoid pointing the camera lens in
angles where the IR LEDs are
blocked by the camera cover or dome
cover. If IR LEDs are blocked, it may
result in an unclear nighttime image.
6b. Adjust zoom and focus as required.
NOTE: Lens adjustment levers are by default
in the locked position. Turn counterclockwise
to unlock. Tighten levers to secure lens
setting.
6c. (Optional) Insert a microSD card into the
camera. To enable recording, you must
format the microSD card and configure
microSD recording (see "8.9.1 Record
Directory" on page 44
NOTE: The camera supports microSD cards
up to a maximum size of 64GB. SanDisk™ or
Kingston™ brand microSD cards are
recommended.
6d. Re-attach the camera cover, using the
thumb screw as a guide, until it snaps into
place.
Camera Installation
).
11