16.11 Distance And Trip Counters; 16.11.1 How To Reset Distance And Trip Counters - Furuno FCR-2107 Operator's Manual

16. Recording Functions

16.11 Distance and Trip Counters

Distance and trip counters have separate
fields for both through water and over
ground distances. This information is
available on the Record page of the
Sensors dialog box, shown right. To reset
the distance and/or trip counter, see the
section that follows.

16.11.1 How to reset distance and trip counters

It is useful to reset the distance counter when you are starting a new voyage.
Alert Log
Alert Queue
16-14
To reset the distance and trip counters:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the guidance area
then push the left button. Choose Record from the menu then push the
scrollwheel.
2. Choose Reset from the menu then push the scrollwheel.
3. Choose Distance Counter from the submenu then push the scrollwheel.
4. You are asked if you are sure to reset the distance and trip counters; click
the OK button to reset those counters.
To reset only the trip counter:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the guidance area
then push the left button. Choose Record from the menu then push the
scrollwheel.
2. Choose Reset from the menu then push the scrollwheel.
3. Choose Trip Counter from the submenu then push the scrollwheel.
4. You are asked if you are sure to reset the trip counter; click the OK button
to reset the trip counter.