How To Customize Operation - Furuno FCR-2107 Operator's Manual

1.11

How to Customize Operation

Several operation items may be customized to suit your needs.
1. Use the trackball to select the MENU box at the right side of the screen then push the left button.
2. Spin the scrollwheel to select Initial Setting.
3. Push the scrollwheel.
4. Put the cursor on the small triangle in the upper left corner of the Initial Settings dialog box to show the Initial
Settings menu. Spin the scrollwheel to select Operation then push the scrollwheel to open the Operation menu.
Operation menu
5. Set each item as appropriate, referring to the table below for details.
6. Push the right button to close the menu.
Item No.
Key Beep Loudness of key beep when a key
sequence is correctly done.
Wheel Drive Select how to cycle data when using
the scrollwheel.
Alarm Level Volume of audio when alarm is
generated by the system.
TTG Display Select speed to use in TTG
calculation: water speed or ground
speed.
TTG with VRM Show TTG below VRM box, in
radar and chart radar modes.
Operation menu items
Description Options
Off (no beep), Low, Mid, High
Normal: Cycles numeric data in ascending order and
indication data in clockwise order.
Reverse: Reverse of "Normal".
Off*, Low, Mid, High
(*: radar, chart radar only)
Off (disable TTG feature), ground speed, water speed
Off, VRM1, VRM2, VRM1+VRM2
1. Operational Overview
1-15