Resetting Trip Distance - Furuno 1823C-BB Operator's Manual

3. PLOTTER OPERATION
3.12

Resetting Trip Distance

Trip distance is shown on the navigation data display. You can reset the trip
distance to zero as follows:
1. Press the [MENU] key.
2. Press the E:SYSTEM CONFIGURATION and A:GENERAL SETUP soft keys
in that order to show the GENERAL SETUP menu.
3. Use the trackball to select RESET TRIP LOG, then press the A:EDIT soft key.
4. Use the trackball to select YES, then press the C:ENTER soft key.
5. Press the [MENU] key to close the menu.
3-60
KEY BEEP ON
LANGUAGE ENGLISH
RANGE UNIT nm, kt
°F
TEMPERATURE UNIT
DEPTH UNIT ft
TEMPERATURE SOURCE NMEA
DEPTH SOURCE NMEA
RESET TRIP LOG NO
General setup menu, page 1
offered by Busse-Yachtshop.de
GENERAL
SETUP1
A EDIT
NEXT
D
PAGE
E RETURN