Furuno FCR-2107 Operator's Manual page 173

1. The source and edition date of the chart radar are displayed here.
2. A list of charts stored in the CD-ROM, edition number of the chart and the number of updates included in the
chart.
3. In the Load Selector field, you can choose how to pick desired charts from the list:
• Name: Chart names are displayed on graphical presentation if selected.
• Permit: Available charts will be highlighted in the CD-ROM and for which you have permits.
• RENC Canceled Charts: The system will display the charts that are canceled on RENC and normally on
CD-ROM.
• Group: If you have predefined a group of charts the system will highlight those charts in the group that are
available in the CD-ROM.
• Manual Selection: You can highlight desired charts from the list.
• Missing only: Loads and display on graphical presentation only charts and their updates that are not already
loaded.
4. Other buttons:
View CD-ROM Publisher Notes: View important notices published by chart producer
View CD-ROM content Summary: Provides a list of the charts on the CD ROM that can be used.
Load and Conv. History: Displays the charts on the CD-ROM that have been loaded and converted.
Remove: Remove CD-ROM catalog from this system.
5. The Edit Group button is used to create and modify a group.
6. The Load button is used to start loading.
7. The Edit Group button is used to create and modify group.
6. The Load button is used to start loading.
Note 1: The system can convert into SENC and set the "Display Until" date automatically. This is the recommended
way. For how to do this, see section 7.3.2 How to select automatic SENC conversion and display until date.
7. Vector Charts
(WT)
1.
2.
3.
4.
5.
NM
6.
7-9