Normal Operation; Timer Control - Dimplex DXDH10T Installation And Operating Instructions Manual

NORMAL OPERATION

Controls are located at the bottom
right hand corner of the appliance.
On the left are indicator lights and
on the right is a dual option simple
rotary control knob for selecting the
operation required.
Indicators

Timer control

Timer Control Options:
1) Turn the control knob counter-clockwise to " CONT " for continuous
dehumidifying. Alternatively set to " OFF " and the unit turns off.
2) Turn clockwise to select and set the runback time to automatic shut off. " 1 "
stands for one hour and " 8 " for eight hours. (Set to " 0 " the unit turns off).
Indicators:
1) "DEHUMIDIFY " indicator : it lights up to indicate the unit running
dehumidification.
2) "DEFROST " indicator : blinks when defrosting. It will automatically return to
dehumidification. (To maintain the efficiency of dehumidification, the defrosting
time is controlled to be less than one third of the running time.)
3) " FULL" indicator : This lights up when the water tank is full of water or out of
position. To restart please empty the tank and / or refit the tank correctly.
Note:
o o
This appliance can be used in ambient temperatures between 5 C and 35 C.
o
Do not operate the unit in temperatures below 5 C, this could cause ice to
accumulate in the unit.
To Empty the Water Tank:
When the tank is full the " FULL " indicator lights and the unit stops automatically.
Wait a few minutes as the appliance is still working or just stopping otherwise some water
may spill or drip out.
To remove the tank, pull the lower handle gently, carefully support the tank upright and
horizontally with two hands and remove to empty. After pouring out the water, clean the
tank and replace it on the appliance.