SAFETY INFORMATION Please read the operating instructions carefully before using your dehumidifier for the first time and keep them in a safe place. Never immerse the appliance in water or other liquids. Never operate the appliance if a cable or connector has been damaged, after appliance malfunction or if the appliance was dropped or otherwise damaged.
OPERATING INSTRUCTIONS 1. Control panel 2. Air outlet 3. Handle 4. Front panel 5. Back panel Water outlet tube (continuous use) 7. Water tank CONTROL PLATE DESCRIPTION...
OPERATION INSTRUCTION Starting the unit 1. Firstly, turn the humidity control switch to the “OFF” position. 2. Plug in the dehumidifier. 3. Turn on the humidity control switch(clockwise) and turn the same switch to the reading of the desired humidity(60% in general as shown on position”4”). Turning off the unit 1.
6. Other than on the case of note 2 above , where the dehumidifier does not start, the operational light does not illuminate or the dehumidifier intermittently stops for unknown reasons, please check the plug and power supply for poor connection. If the plug and power supply are in good condition, wait for 10 minutes and restart the unit (it can take about 10 minutes for the unit to reset).
Filter Removal •To remove the filter you must first remove the water tank as instructed above. •The filter can then be removed from its slot by gripping the filter handle and sliding it down and out of the back of the appliance as indicated below. •...
SPECIFICATIONS MODEL DXDH10N SPECIFICATION POWER SUPPLY 1∮220-240V~50Hz POWER INPUT 250W RUNNING CURRENT 1.2A NET WEIGHT 11.1Kg MOISTURE REMOVAL 10 litre/day liter/day 30℃RH 80%) CABINETDIMEMSION (W)365x(D)220 x(H)490 TEMP. RAHGE FOR USE 5℃~35℃ WATER TANK CAPACITY 2.3L (CE) N 842/2006: R134A is a kind of fluorinated greenhouse gas covered by the Kyoto Protocol.
Need help?
Do you have a question about the DXDH10N and is the answer not in the manual?
Questions and answers