Control Panel; Operation - Dimplex GDDE25E Instruction Manual

Control Panel

Indicator
lights

Operation

1. Plug the unit into a correct mains socket. (Please refer to the rating label at the rear
of the unit for correct voltage/frequency.)
2. Please NOTE: Before first proper use, run the dehumidifier in continuous mode for
24 hours.
3. Press POWER button to turn on the unit. To turn off the unit, press POWER button
again.
4. To select the desired relative humidity press the UP/DOWN arrow buttons. Each
press will increase/decrease the desired room humidity by 5%. The room humidity
can be set between 35-80% or continuous, and will show on the display. The unit
will cycle on and off to maintain the selected humidity level.
5. Press the FAN SPEED button to select between High & Low speeds. The selected
speed indicator light will turn on.
6. To program the unit to automatically turn on, press the TIMER button, while the unit
is OFF. The timer can be set in 30 minute increments, up to 10 hours. After 10 hours,
each press of the button with increase the time in 1 hour increments up to 24 hours
7. To program the unit to automatically turn off, press the TIMER button, while the unit
is ON. The timer can be set in 30 minute increments, up to 10 hours. After 10 hours,
each press of the button with increase the time in 1 hour increments up to 24 hours
8
Digital humidistat
display
Buttons