Table of Contents
Advertisement
T E L E C O M
PAGING AND MESSAGING
Making An Internal Page
To make an announcement through keyset speakers:
1. Lift the handset.
2. Press the PAGE key, if assigned OR Press the SCROLL key, OTHER soft key and PAGE soft key OR Dial
55.
3. Dial the desired zone number 1, 2, 3 or 4. (If using a 408/408i system, dial 1 or 2 only). OR Dial 0 to
page all internal zones.
4. After the attention tone, make your announcement.
Note: If you have a separate PAGE key dedicated to each page zone, press the dedicated PAGE key to
dial the required zone number.
Making An External Page
To make an announcement through external paging speakers:
1. Lift the handset.
2. Press the PAGE key, if assigned, OR Press the SCROLL key, OTHER soft key and PAGE soft key OR Dial
55.
3. Dial the desired zone number 5, 6, 7 or 8 (see note 1). OR Dial 9 to page all external zones.
4. After the attention tone, make your announcement.
Note:
1. DCS-816, 408 and 408i systems have one external zone only (zone 5).
2. If you have a separate PAGE key dedicated to each page zone, press the dedicated PAGE key to dial
the required zone number.
All Page
To page all designated keysets and external speakers at the same time:
1. Lift the handset.
2. Press the PAGE key, if assigned OR Press the SCROLL key, OTHER soft key and PAGE soft key OR Dial
55.
3. Press the ✱ key, or press the PAGE (ALL) key if assigned.
4. After the attention tone, make your announcement.
Note: The LED on the PAGE key will only light when an All Page is in progress.
Meet Me Page / Meet Me Answer
1. Lift the handset.
2. Press the MEET ME PAGE (MMPG) key, if assigned OR Press the SCROLL key, the OTHER soft key and
the MMPG soft key OR Dial 54.
3. Dial the desired zone number.
4. After the attention tone, instruct the paged person to dial 56 (Meet Me Answer).
5. Press the TRSF key.
6. Remain off-hook until the person dials 56 from any phone.
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK
Advertisement
Table of Contents
