Table of Contents
Advertisement
T E L E C O M
To set alarms:
1. Press the TRSF key and dial 112.
2. Dial the alarm number 1–2 (or 1–3 for DCS systems).
3. Dial the time you want the alarm to sound. Enter the time as HHMM (hours and minutes) using a 24-
hour clock. For example, 1430 is 2:30pm.
4. Dial 1 (TODAY) or 2 (DAILY) to select the alarm type. Dial 0 (NOTSET) if you choose not to set the
alarm.
5. Press the TRSF key.
6. Repeat for each alarm if needed.
To cancel any alarms you have set:
1. Press the TRSF key and dial 112.
2. Dial the alarm number 1–2 (or 1–3 for DCS systems).
3. Press the HOLD key.
To Answer an Alarm
When the alarm rings, you will hear a series of short rings, repeated three times, and 'ALARM
REMINDER' is displayed on the keyset.
• Lift the handset to answer the alarm. If you do not, the alarm will alert you two more times at 5-
minute intervals.
Note: You can also select to have a specific reminder message displayed on your keyset. See Alarm
Reminder Messages under Display Features.
Answering the Doorphone
If your extension is programmed to receive calls from a doorphone, you will hear a series of short rings
repeated.
• Lift the handset or press the ANS/RLS key and you are connected to the doorphone.
• If an electric door lock release is installed, dial 13 to unlock the door.
Calling the Doorphone/Room Monitor
You can call the doorphone and listen to what is happening outside or in another room.
• Dial the extension number of the doorphone.
You will be connected to the door phone and you can listen or have a conversation.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER
key before you begin dialling.
Boss/Secretary Hotline
You can program two extensions to have a 'hotline' between them, called the boss/secretary hotline.
When the boss extension is in the DND mode, all of its calls will ring the secretary extension. Either
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK
Advertisement
Table of Contents
