Recall Dial Tone; Sending A Flash; Busy Line Queuing With Callback - Samsung DCS EURO SERIES 24 User Manual

Button handsets

Table of Contents

T E L E C O M

Recall Dial Tone

• Press the NEW key to disconnect your existing call, wait for dial tone and then make a new call on the

same line.

Note: If the NEW key does not appear on your keyset, the RECALL key may be programmed to recall dial

tone.

While on an outside call, press the programmed FLASH key to send a flash to the telephone company.

This is required for some custom calling features or CENTREX use (e.g. for nuisance calls).

If you receive a busy signal when you are selecting an outside line, this means that the line or group of

lines is busy.

1. Press the CALLBACK key or dial 44. You will hear confirmation tone. When the line becomes free the

system will call you back.

2. Lift the handset or press the ANS/RLS key to answer, wait for dial tone and dial the telephone number

or speed dial number again.

Note:

• A callback will be cancelled if not answered within 30 seconds. If you have set a callback, your

CALLBACK key will light.

• If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key

before dialling.

FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK

Table of Contents