Outside Calls; Making An Outside Call; Answering An Outside Call; Universal Answer Device - Samsung DCS EURO SERIES 24 User Manual

T E L E C O M

OUTSIDE CALLS

Making An Outside Call

1. Lift the handset and press an idle outside line key, line group key or dial a line access code to receive
dial tone.
OR
To use the speakerphone, press an idle outside line key or line group key, or dial a line access code, to
receive dial tone through the speaker.
OR
Press the SPEAKER key, receive internal dial tone and dial a line access code.
2. Dial the telephone number.
3. Finish the call by replacing the handset or pressing the ANS/RLS key.
Note: You will receive No More Calls tone when you attempt to make a call and there is no key available
for that line.
• If Least Cost Routing (LCR) is enabled on your phone system, there may be a key labelled LCR or it may
be selected by dialling the access code (e.g. '9') which is set during system installation.
• If your system is programmed to require an authorisation code before you can make a call, dial * plus
a valid code before selecting a C.O. line.
• If your system is programmed to require an account code before you can make a call, press the ACCT
key, or dial 47, followed by a valid account code. Press the ACCT key or the ACCT soft key and then
select a C.O line.
For more information on authorisation and account codes, see your system administrator.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER
key before dialling.

Answering an Outside Call

• Lift the handset and you are automatically connected to the ringing call. (See Ring Preference under
Customising Your Keyset.)
OR
Press the ANS/RLS key to automatically answer on the speakerphone.
Note: If a call is flashing at your keyset but not ringing, you must press the flashing key to answer.

Universal Answer Device

Outside lines can ring over the paging system or to a loud ringer. To answer calls ringing in night service
to this device, dial 67 or press the UA key.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER
key before dialling.
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK