Table of Contents
Advertisement
Help Functions
You have to register the remote set after purchase.
Registering the Remote set
1
Remote set in
standby mode
Press the
button.
7
Base set
Press the
button
more than 2 seconds.
It should necessarily set
registered properly if you don't press the
pressing the registering number.
Paging the Remote set (from the base set to the remote set)
If you press the
paging function is worked
with this in-use lamp blinking
for 30 seconds.
If you place the remote set on the charger during the paging, the paging is canceled.
You are able to use this set for paging only.
Use it for looking for the remote set. You can't response to paging.
To cancel paging, press the
39
2
3
Display
You will hear a beep tone
confirming the completion of
the setting.
in order to register number. It will not be
button right after
button, the
button on the base set or any buttons on the remote set.
4
5
Press the
button twice.
6
Press the
button.
40
Advertisement
Table of Contents
