G
F
E N E R A L
U N C T I O N S
Paging
You can page the handset from the base unit. Using this feature, you can
locate the lost handset.
Press the Paging button on the base unit.
Result : The lower lamp on the base blinks for about 6 seconds and all
handsets registered with the base will ring four times.
Note : If a call comes in while the handset is being paged, the handset
stops paging and sounds the ringer.
Key Lock
If you turn this feature on, all buttons except for the
locked and will not function.
You can answer incoming calls or intercom calls by using any buttons on
the handset. But when you hang up, the handset returns to the lock
mode. This feature is useful to avoid pressing buttons by mistake.
1. To turn the feature on, press and hold the
until
icon appears on the LCD window.
2. To turn the feature off, press and hold the
until
icon disappears from the LCD window.
DO NOT hold the
button for more than three seconds, or the
handset will turn off.
Note : If a power failure occurs, the Key Lock feature is automatically
cancelled.
22
button will be
button for 1.5 seconds
button for 1.5 seconds
Tone Dial Switchover
To access certain services such as voice mail or interactive telephone
system features, it is necessary to use tone dialling. When your phone is
set to the pulse mode, DTMF dialling is available.
1. Press the
button while the phone is in the pulse dial mode.
Result : Your phone is converted to the tone dial mode temporarily.
2. When you press the
button during a call or end the call, the
phone automatically returns to the pulse mode.
Registered Recall
The
button is used in conjunction with special services such as 'Call
Waiting' which may be offered by your telephone company. You can local
transfer a call to another extension on a PABX, using this feature.
To send a flash, simply press the
button while the line is engaged.
Result : The display shows F.
G
F
E N E R A L
U N C T I O N S
23