Table of Contents
Advertisement
T E L E C O M
To dial by directory:
1. Press the DIR key (if assigned) OR Press the SCROLL key and select DIR from the CALL menu.
2. Select the directory you wish to search: PERS (personal speed dial numbers), SYS (system speed dial
numbers) or STN (extension names).
3. Press the key that corresponds to the first letter of the name you wish to search for.
4. Press the VOLUME Up and Down keys to scroll through the names. (If no list exists for the letter
selected, the system will tell you.)
5. Press the DIR key or the DIAL soft key to dial the number.
Display Number Dialled
Display keysets show digits as they are dialled. They will stay in the display until the call duration timer
comes on automatically or the TIMER key is pressed (see below). If the call duration timer is not used,
the number dialled is displayed until the call is released, transferred or put on hold.
Call Duration Timer
The system can be set to time outside calls automatically. A few seconds after you dial a telephone
number, the timer will appear in the display. (It appears immediately for incoming calls.) See Auto
Timer, below.
To manually begin timing a call, you can use the Timer function. See Timer Function, below
Auto Timer
You can have the timer automatically start when you answer incoming calls, or after a short delay on an
outgoing call.
1. While on-hook, press the TRSF key and dial 110.
2. Dial 11 to turn the auto timer on or 10 to turn it off.
3. Press the TRSF key to store your selection.
The call timer displays in minutes and seconds for the duration of the call. If a call lasts longer than 99
minutes, the timer restarts.
Timer Function
You can manually time your calls or use this feature as a simple stopwatch.
1. When the keyset is idle, press the TIMER key or press the SCROLL key and select TIMER from the
OTHER menu to start timing. The timer shows in the display.
2. Press the TIMER key or TIMER soft key to stop timing.
3. Lift the handset and replace it. The display will return to normal.
Note: If you attempt to start the timer manually while the automatic timer is on, the call duration time is
restarted.
Call Cost
If your phone system is programmed to display call costs, you can have the call charge automatically
displayed on the LCD when you make a call.
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK
Advertisement
Table of Contents
