Table of Contents
Advertisement
T E L E C O M
Hot Keypad
Your keyset's keypad can be made "live" or "hot" so that it is not necessary to lift the handset or press
the SPEAKER key before you begin dialling. Calls can be made and features activated by simply dialling
the line number, trunk group access code, internal number or feature access code. To activate this
feature:
1. While on-hook, press the TRSF key and dial 110.
2. Dial 031 to turn the Hot Keypad on or 030 to turn it off. (Or use the soft keys and VOLUME Up/Down
keys to select.)
3. Press the TRSF key to store your selection.
Key Confirmation Tone
You normally hear a short beep (confirmation tone) each time you press a key on the dial pad. This tone
can be turned on or off.
1. While on-hook, press the TRSF key and dial 110.
2. Dial 041 to turn tones on or 040 to turn tones off. (Or use the soft keys and VOLUME Up/Down keys
to select.)
3. Press the TRSF key to store your selection.
Rejoining a Page
This feature allows you to hear the remaining portion of an ongoing internal page after you return your
keyset to idle. To enable this feature:
1. While on-hook, press the TRSF key and dial 110.
2. Dial 051 to turn this feature on or 050 to turn it off. (Or use the soft keys and VOLUME Up/Down keys
to select.)
3. Press the TRSF key to store your selection.
Ring Preference
This feature automatically answers ringing calls when you lift the handset or press the ANS/RLS key. This
method will always answer calls in the order they arrived at your keyset. If you turn Ring Preference
off, you must press the flashing key to answer a call, allowing you to answer calls in the order you
choose.
1. While on-hook, press the TRSF key and dial 110.
2. Dial 061 to turn Ring Preference on or 060 to turn it off. (Or use the soft keys and VOLUME Up/Down
keys to select.)
3. Press the TRSF key to store your selection.
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK
Advertisement
Table of Contents
