Download  Print this page

Samsung SMT-W5100E Quick Setup Manual

Hide thumbs
   

Advertisement

Registering SMT-W5100E Handsets (work with SMT-R2000 AP only)
Handset Registration
1.
Need to un-register first, if handsets have previous registration data
a.
Press <menu>, <8>, <0000> (default password is 0000), <4>, <0000>, <Yes>
i.
to un-register
Enter the following info to register the handset:
b.
Press <Menu>
i.
Select <8> for System
ii.
Enter password <0000>
iii.
Select <1> for Registration
iv.
Press <OK> to select <1. System 1>
v.
Select <1> for DHCP mode and continue on x. or,
vi.
vii.
viii.
Note: DO NOT ENTER LEADING 0 FOR IP ADDRESS. EX. Enter 192.168.1.101
not 192.168.097.101.
Enter System IP address, e.g. 192.168.1.5, and press <OK>
ix.
Enter System Gateway, e.g. 192.168.1.1, and press <OK>
x.
Enter System Netmask, e.g. 255.255.255.0, and press <OK>
xi.
Enter System SSID, e.g. 80211g, and press <OK>
xii.
i. Press and hold key for numeric digit
Enter user ID, e.g. 1212, and press <OK>; all handsets have the same default
xiii.
ID & PW.
i. It is recommended to change the ID to match the handset extension. It
will be easier for maintenance purpose. For example, change user ID to
3301 for extension 3301. User ID must be 4 digits.
ii. Use MMC 846 to change the user ID.
Enter password, e.g. 0000, and press <OK>.
xiv.
© SAMSUNG Telecommunications America
SMT-W5100E Handset
Quick Set-Up Guide
Select <2> for Static IP mode
Enter handset IP address and press <OK>
i. e.g. 192.168.1.101 (use "*" for ".")
1
01/2007

Advertisement

Table of Contents
loading

  Also See for Samsung SMT-W5100E

  Related Manuals for Samsung SMT-W5100E

  Summary of Contents for Samsung SMT-W5100E

  • Page 1 SMT-W5100E Handset Quick Set-Up Guide Registering SMT-W5100E Handsets (work with SMT-R2000 AP only) Handset Registration Need to un-register first, if handsets have previous registration data Press <menu>, <8>, <0000> (default password is 0000), <4>, <0000>, <Yes> to un-register Enter the following info to register the handset: Press <Menu>...
  • Page 2 Static WIP IP registration enable or disable WEP key enable or disable For example: Sample Configuration Table (3 APs + 4 Handsets) System IP: 192.168.1.5 MGI IP: 192.168.1.7 System gateway: 192.168.1.1 SSID: 80211g AP TX Power: 100% (max) AP1 IP: 192.168.111.11 © SAMSUNG Telecommunications America 01/2007...
  • Page 3 192.168.111.12 AP2 RF CH: AP3 IP: 192.168.111.13 AP3 RF CH: Handset 1 IP: 192.168.1.101 Handset 2 IP: 192.168.1.102 Handset 3 IP: 192.168.1.103 Handset 4 IP: 192.168.1.104 WEP key: Disable Static WIP Reg: Disable CODEC: G729 © SAMSUNG Telecommunications America 01/2007...
  • Page 4 849 will be reset to the factory default. After system comes back, go back to the MMC 849 and continue the following: Enable VoWLAN registration. [REGISTER VoWLAN] [ENABLE MMC 848 Set handset IP address for each handset. [IP:001 USED: [192.168. 1.101 ] © SAMSUNG Telecommunications America 01/2007...
  • Page 5 IEEE 802.11b/g (SSID): 80211g 1. Current software version of WIP-5000M requires numeric SSID. c. Click [Update] Under [Manage], a. [Ethernet Setting] i. WAN Interface Settings 1. Static IP Address: 192.168.111.11 (Must use different address for each AP) © SAMSUNG Telecommunications America 01/2007...
  • Page 6 It will keep searching AP (in pre-defined time interval). Once in range, handset will automatically re-registered and in service. Quick Troubleshooting if handset fails to register: 1. Ping IP address of MCP from PC (via wireless WLAN connection) © SAMSUNG Telecommunications America 01/2007...
  • Page 7 AP. If this feature is used, all APs should have the list. Note: this feature is not very secure. i. [Manage], [MAC Filtering], 1. Filter: Allow only stations in list 2. At the bottom of screen, type in MAC address in the box, and click [Add] © SAMSUNG Telecommunications America 01/2007...
  • Page 8 For OfficeServ 500M version, VoWLAN starts with IDX061 For OfficeServ 500L version, VoWLAN starts with IDX121 For OfficeServ 7200, VoWLAN starts with IDX061 For OfficeServ 100, VoWLAN starts with IDX033 • MMC 805: Adjust voice path gain © SAMSUNG Telecommunications America 01/2007...
  • Page 9 “WLAN” entry is used for WIP-5000M with WBS24 Combo AP o “ITP” entry is used for ITP phone and WIP-5000M/SMT-W5100E with SMT- R2000 dual band AP • MMC 217: Station pair assignment • MMC 210: To change call forward setting •...