Table of Contents
Advertisement
6. Press
button.
7. Enter the new PIN code again to confirm the number.
8. Press
button.
Note: If you change the PIN code and then forget it, you will
have to contact service center.
Tone Dial Switchover
To access certain services such as voice mail or interactive
telephone system features, it is necessary to use tone dialing.
When your phone is set to the pulse mode, DTMF dialing is
available.
1. Press the asterisk (
) while on the phone in the pulse dial
mode.
Result: Your phone is converted to the tone dial mode tem-
porarily.
2. When you finish the call, the phone automatically returns to the
pulse mode.
Note: If you press the C/R button during a call, the phone also
returns to the pulse mode.
36
Digital Cordless Telephone
Registered Recall
The C/R button is used in conjunction with special services
such as 'Call waiting' which may be offered by your tele-
phone company. You can place a new call directly after a
call or transfer a call to another extension under PABX,
using this feature.
To send a flash, simply press C/R button while the line is
engaged.
Result: The display shows
Barring Calls
• It is possible to set the phone to restrict numbers that can
be dialed. The phone cannot dial a phone number beginning
with the specific numbers that you specify.
• You can set up to 4 restricted numbers containing up to 4
digits each.
• If you turn the feature on, the handset requires a PIN code
when the restricted number is dialed. If you enter a wrong
number, your phone returns to the Standby mode. If you
enter a correct PIN, you can make calls.
Note: You can make an emergency call (112, 999) even when
you activate the outgoing call barring option.
.
Digital Cordless Telephone
37
Hide quick links:
Advertisement
Table of Contents
