Table of Contents
Advertisement
Performance
Instruction manual
7 Special directions
To achieve the full clearaudio warranty, it is necessary that you fill out and send the
corresponding part of the warranty registration certificate /card back to clearaudio, within
two weeks after purchase. Only if the product is returned in it's original packing clearaudio
can provide the warranty.
Performance
Transportation advice: If any transportation of the
-turntable should be
necessary, please always remove the turntable platter. Otherwise serious damage can occur!
The bearing hole needs to be covered as well, to avoid any dust coming into the bearing.
Always take of the pulley of the motor unit as well, to prevent the motor shaft from any
damages.
Performance
If the
-turntable is for a longer time not in use, please disconnect the motor
from the mains supply.
Every two years you can lubricate (only if you will recognize speed variations) the bearing of
the turntable platter with the supplied oil. In this case it is enough to put 4 or 5 drops of the
oil onto the bearing shaft.
Please take special caution to any damages of the power cord. Any damages should only be
repaired only by authorized personal. A damaged power cord must be exchanged
immediately!
6. Service
If any service or repair on all clearaudio products is necessary, please contact your dealer /
distributor or contact clearaudio directly. We can inform you as well about your nearest
service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be
transported and/or shipped. Any further questions you may have about this turntable should
be directed to the distributor or directly to clearaudio at
clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)1805/059595
www.clearaudio.de
info@clearaudio.de
Page 18
© clearaudio electronic GmbH 2007
Advertisement
Table of Contents
