Clearaudio Peerformance Instruction Manual page 11

Secure the tonearm only slightly using the fixing screws (marked red in the picture 1 and 2)
so you can still move it for exact adjustment. After adjusting the vertical position you should
tighten the fixing screws to place the tonearm in it's final position.
1
The right vertical position of the tonearm depends on the height of the pick-up/cartridge.
Therefore the pick-up-cartridge has to be installed now.
The exact setting of the tonearm requires the installation of the
pick-up/cartridge. Please follow the instructions given by the
When installing the pick-up/cartridge connect the four coloured cables of the tonearm to the
four coloured connection pins of the pick-up/cartridge.
Colour code key of the satisfy-tonearm cables:
Left channel (L+)
Left channel (L -)
Right channel (R+) →
Right channel (R -) →
Page 11
pick- up manufacturer !
→
white
→
blue
red
green
Performance
2
© clearaudio electronic GmbH 2007
Instruction manual