Clearaudio Peerformance Instruction Manual page 9

Performance
Instruction manual
Place the pre-mounted chassis on your hifi-rack or another suitable base.
Please remove the protective seal from the bearing shaft and place two drops of the
synthetic bearing oil on the ceramic bearing shaft. Slip the bearing top onto the bearing shaft
of the turntable (please remove the safety strip first). Now you can set the platter carefully
onto the bearing. To avoid damages make sure you slide the inverted bearing slowly and
cautiously on the polished ceramic shaft. Hold the platter in one hand while with the other is
securing the bearing top so it can neither slip and nor fall on your turntable.
The marks (dots) on the platter and the top of the bearing have been carefully measured.
Please make sure they align exactly as shown in the picture.
Page 9 © clearaudio electronic GmbH 2007