3.3.4
Lower Base Unit
(1) Remove the upper cover assy (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.3).
(3) Remove the face up stacker assy (see 3.3.7).
(4) Remove the connecting cables 2 and 3 of the pulse motors from the connectors (DM, RM) of the
M7E-PCB 1.
(5) Remove the LED head cables 4 and 5 from the connectors (HEAD1, HEAD2).
(6) Remove the connecting cable 8 of the heater from the connector (CN2).
(7) Open the manual feed guide assy, remove six screws 7, then remove the lower base unit 6.
41356801TH Rev.1
7
7
5
8
1
7
7
6
4
2
3
52 /