Specifications; Table 1.1: Specifications - Advantech ASMB-820I User Manual

1.3

Specifications

Table 1.1: Specifications

Processor
CPU
System Memory
Memory Capacity
Memory Type
DIMM Sizes
Memory Voltage
Error Detection
On-Board Devices
Chipsets
Network Controllers
VGA
Super I/O
BMC (820I SKU Only)
Input / Output
Serial ATA
LAN
USB
VGA
Keyboard / Mouse
Serial Port / Header
Power Connector
System Power
 Supports Intel XEON E5-2400 series processor with Quad/
Six/Eight cores
 Supports TDP 50W/60W/70W/95W Intel XEON E5-2400
series processor
 Xeon processor supports DDR3 memory bus
Total 6 memory slots provided

 3 channels per processor, 2 memory slot per channel
 Supports up to 96 GB memory
Supports DDR3 1066/1333/1600 MHz ECC Registered / ECC
Unbuffered / Non-ECC Unbuffered Modules.
Each memory slot supports 1GB, 2GB, 4GB, 8GB, 16GB memory
size modules.
1.35V & 1.5 V
 Corrects single-bit errors
 Detects double-bit errors (using ECC memory)
Intel C602J PCH provide 8xPCIe Gen2 lanes for VGA, Network.
 1 x Intel 82574L Gigabit Ethernet Controller connected to
C602J through PCIe Gen2 Lane.
 1x Intel 82579LM Gigabit PHY connected to C602J MAC.
 Above network Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ-45 output.
 1 x 10/100BASE RealTek 8201EL-VB PHY connected to
AST2300 for dedicated IPMI/IKVM.
ASPEED AST2300 controller with 64 MB VGA memory provides
basic 2D VGA function.
Nuvoton NCT6776F chip provides motherboard keyboard mouse,
RS-232, and hardware monitor functions.
ASPEED AST2300 provides IPMI & IKVM function.
Total 6 x SATA ports, 2 ports provide 6 Gb/s bandwidth, 4

ports provide 3 Gb/s bandwidth.
 RAID 0, 1, 5, 10 support (Windows only).
 2 x RJ-45 LAN ports (10/100/1000 Base-T LAN).
 1 x RJ-45 Dedicated IPMI LAN port(10/100 Base-T) for IPMI
only, there is no regular LAN function (ASMB-820I Only).
 4 x USB ports at rear window.
 3 x USB internal headers (6 ports).
 2 x internal Type-A USB port.
 1 x VGA port
 PS/2 keyboard and mouse connector at rear window.
 1 x internal header (2 x 5 2.5 mm pitch) for UART port
 1 x external DB9 UART
1 x 24-pin SSI EPS 12 V power connector (Input 12 V, 5 V, 3.3 V, 5
V standby)
3 ASMB-820I User Manual