1.6
System Memory
ASMB-820I has six 240-pin memory slots for DDR3 1066/1333/1600 MHz memory
modules with maximum capacity of 96 GB (Maximum 16 GB for each DIMM).
ASMB-820I supports registered DIMMs or unbuffered DIMM with ECC / Non-ECC
memory module.
1.7
Memory Installation Procedures
To install DIMMs, make sure that two handles of the DIMM socket are in the "open"
position. The handles lean outward. Slowly slide the DIMM module along the plastic
guides on both ends of the socket, and then press the DIMM module right down into
the socket, until you hear a click. This is when the two handles have automatically
locked the memory module into the correct position of the DIMM socket. To remove
the memory module, just push both handles outward, and the memory module will be
ejected by the mechanism in the socket.
Socket / Color
DIMMA1 (Orange)
DIMMA2 (Black)
DIMMB1 (Orange)
DIMMB2 (Black)
DIMMC1 (Orange)
DIMMC2 (Black)
1.8
Processor Installation
The ASMB-820I is designed for single LGA1356, Intel E5-2400 series Xeon proces-
sor.
ASMB-820I User Manual
Quantity of memory installed
1
2
3
V
V
V
V
V
V
8
4
5
6
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V