Table of Contents
Advertisement
1.2 Specifications
Standard SBC Functions
• CPU: Socket 370 for Intel
and Celeron
heatsink for this CPU card is no longer available; if you need a
heatsink, you can use the Advantech Fan/heatsink module
(Advantech P/N:1759209100).
• BIOS: 2 Mbit Flash BIOS,
Supports Plug & Play, APM 1.2
Supports Ethernet Boot ROM
Supports boot from USB device
Supports boot from CD-ROM
Supports boot from LS-120 ZIP
Optional Customer icon
• Chipset: Intel
nd
• 2
level cache: 512/256 KB on Pentium III or 256/128 KB on
TM
Celeron
• System memory: One 168-pin DIMM socket, supports 8 MB to
512 MB, accepts 8/16/32/64/128/256/512 MB Synchronous DRAM
• PCI IDE interface: Two Enhanced IDE interfaces, support 4 IDE
devices. Channel One supports up to UltraDMA 100. Channel
Two supports up to UltraDMA 33.
• Floppy disk drive interface: Supports up to two FDDs (360 KB/
720 KB/1.2 MB/1.44 MB/2.88 MB) with Hirose 20 pin FDD connector
• Parallel port: One parallel port, supports EPP/ECP
• IR port: One 115 kbps IrDA compliant serial infrared
• Serial ports: 2 serial ports
COM1: RS-232, COM2: RS-232/422/485
• Watchdog timer: 62 levels timer interval, setup by software,
jumperless selection, generates system reset.
VGA function
AGP SVGA Intergace
• Chipset: Intel 815E embedded
• Display memory: Shares system memory up to 4MB
• Display type: CRT
• Interface: Direct AGP, Accelerator Graphics Ports 1.0 compliant
• Display mode: CRT display supports up to 800 x 600 @ 24 bpp,
1024 x 768 @ 24 bpp
®
TM
processor up to 1.2 GHz (The original Intel
®
815E PCI set, FSB 133/100 MHz
Processor
Pentium III processors up to 1.26 GHz,
TM
Drive
3
Chapter 1 General Information
Advertisement
Table of Contents
