Warning Labels - SawStop ICS31230 Owner's Manual

Warning Labels

Warning labels are mounted on the front, rear and side of the saw, on the table insert, and on the blade guard
for your reference. Some of the warnings on those labels may be additional to the warnings listed above. Be sure
to read the warning labels before using the saw. Copies of the English text of the warning labels are reproduced
below:
8 SawStop 10" Industrial Cabinet Saw
Industrial Cabinet Saw Rev. 2 Ma8 8
purchasing this
SawStop
This saw is equipped with the
®
safety system, designed to
SawStop
reduce the potential for a serious injury
in the event of accidental contact with the
This saw operates differently than
ordinary table saws. Each operator
must read and understand the
Owner's Manual before
operating this saw.
WARNING
!
For your own safety, read the instruction manual before operating this saw.
1. Wear eye protection.
2. Use the blade guard and spreader for every operation for which it can be used, including
all through sawing.
3. Keep hands out of the line of the saw blade.
4. Use a push-stick when required.
5. Know how to reduce the risk of kickback.
6. Do not perform any operation freehand.
7. Never reach around or over the saw blade.
8. Never try to test fire the brake system.
9. Never adjust the position of the brake cartridge while the blade is spinning.
10. Do not try to disable the brake system.
11. Unplug the saw before changing the blade, changing the brake cartridge or servicing.
12. Do not connect the motor directly to a power supply.
13. Use the bypass switch only when necessary.
14. Do not expose to rain or use in damp locations.
Thank you for
®
table saw.
saw blade.
3/9/2010 8:38:29 AM